The TD-V707 is equipped with 3 independent (discrete) heads, and by enabling the azimuth adjustment of the head independently for recording and playback, the stability of the stereo reproduction is clearer and superior in high frequency characteristics. In addition, a separator is installed between the recording head and the reproducing head to eliminate not only the magnetic cross field generated between the heads but also the electrical cross field generated by the head wiring. The head material is amorphous, which has excellent high-frequency characteristics, and fine amorphous. An ARKBASE is installed in the lower part of the chassis to eliminate the influence on the sound caused by vibration when the mechanism operates and resonance generated by external sound. This ARKBASE is a high-density compression molded board. A Closed-loop dual capstan system is adopted for the mechanism part. Capstan and pinch rollers are arranged on both sides of the independent head, and by keeping the tension from the beginning to the end of winding the tape constant, a stable head touch is always obtained. By combining this method with DD motor, sound loss such as stability of head touch, uneven rotation, noise reduction during rotation, etc. is suppressed. In addition, zinc die-cast is used for the mechanical base to increase the durability of the mechanism itself and greatly improve the verticality, parallelism, and vibration resistance of the capstan and pinch roller shaft. In addition, total modulation noise is reduced by using the vibration control capstan base and die-cast head base. As for tape running accuracy, a 3-phase 6-coil Ceralock servo direct drive motor realizes low wow flutter. Wireless remote control is included. The international market version was the JVC TD-V1050TN Titanium color model.
Technical Data:
3-Head Amorphous Discrete heads
3-motor with Direct Drive capstan motor
Wow & Flutter: 0.022% WRMS
Frequency Range (-20dB) 10hz to 23kHz
Dimensions: 435x143x335mm
Weight: 7.6kg
Powered by www.1001hifi.com